Call us
Atlanta, GA, 30326
Call us
Atlanta, GA, 30326
The AK Flex Trigger is a popular upgrade for many AK rifle owners, offering smoother pulls, faster resets, and improved overall shooting performance. While the AK Flex Trigger is a highly reliable and efficient system, like any mechanical part, it can sometimes experience issues. Recognizing and troubleshooting common problems can help ensure the trigger remains in peak condition for optimal performance. Below are some of the most common issues users might face with the AK Flex Trigger, along with solutions to resolve them.
One of the most common issues with the AK Flex Trigger is an inconsistent trigger pull. This can manifest as a trigger that feels heavier or lighter than usual, or one that varies from shot to shot.
Solution: Inconsistent trigger pulls are often due to either improper lubrication or dirt buildup within the trigger mechanism. To address this, first, clean the trigger assembly thoroughly. Use a soft brush or cloth to remove any debris, carbon, or buildup. After cleaning, apply a small amount of firearm-specific lubricant to the trigger components, focusing on the moving parts like the pivot points and the spring. Too much lubricant can cause dirt and dust to stick, so use it sparingly.
Another issue that some users encounter is a delayed or sluggish trigger reset. The AK Flex Trigger is designed for quick and smooth resets, but if it’s not functioning properly, it can impact the speed and accuracy of follow-up shots.
Solution: A delayed reset is often caused by friction or a lack of lubrication within the reset mechanism. Begin by disassembling the trigger group to inspect for any obstructions or buildup. Ensure that the reset spring is intact and functioning correctly. Clean the components thoroughly and lubricate the reset mechanism. If the issue persists, it could be a sign of wear or damage to the internal components, in which case replacing the reset spring or consulting a professional gunsmith may be necessary.
If the trigger isn’t engaging correctly or the rifle fails to fire when the trigger is pulled, there may be a more serious issue with the AK Flex Trigger mechanism. This could be related to the sear engagement or the safety mechanism.
Solution: First, ensure that the safety is in the correct position. If the safety is engaged, the trigger will not function. Next, inspect the trigger assembly for any signs of wear or damage. Pay particular attention to the sear engagement surface, as it could be worn or damaged. If the sear is out of alignment or the trigger isn’t making proper contact, it may be necessary to replace the sear or adjust the engagement angle. Always ensure the safety mechanism is functioning properly as well.
If the AK Flex Trigger feels sticky or gets stuck during the pull, it can be frustrating and disrupt your shooting experience. This issue is often caused by buildup of dirt, oil, or debris, or a lack of proper lubrication.
Solution: Disassemble the trigger mechanism carefully, inspecting the parts for any dirt or grime. Clean the components with a gun-safe cleaning solution, removing any carbon, dust, or residue. After cleaning, reassemble the trigger and lubricate it lightly with high-quality gun oil, focusing on the moving parts. Be careful not to over-lubricate, as too much oil can attract dirt and cause the trigger to become sticky again.
A too-heavy or too-light trigger pull can hinder accuracy and control. If your AK Flex Trigger is feeling too stiff or overly sensitive, it can impact the shooter’s ability to make accurate shots.
Solution: Adjusting the trigger pull weight is essential for achieving a consistent, comfortable feel. For a heavy trigger pull, check the trigger spring tension and ensure it is not too tight. You may need to replace the spring with a lighter one if the current one is too stiff. On the other hand, if the trigger pull is too light, this could be due to a weakened or damaged spring. Replacing the trigger spring with the proper tension should solve the issue. Always refer to the manufacturer’s guidelines to ensure the right spring weight for optimal performance.
Sometimes the AK Flex Trigger may fail to reset after firing a shot, preventing the shooter from taking a follow-up shot immediately. This can be an annoying issue, especially in tactical or competitive scenarios where rapid follow-up shots are critical.
Solution: This issue is often related to the reset spring or trigger mechanism. If the reset is not functioning, the reset spring may be damaged or improperly installed. Inspect the spring and trigger group, and if necessary, replace the reset spring. It’s also a good idea to check for any misalignment in the trigger components. A professional gunsmith can help if you’re not comfortable performing this repair on your own.
Over-travel refers to the excessive movement of the trigger after the sear has been released. This can cause wasted motion, slow follow-up shots, and an overall inconsistent trigger pull.
Solution: To fix trigger over-travel, many AK Flex Trigger systems come with adjustable screws or screws that can be tightened or loosened to control the amount of trigger movement. Check for over-travel adjustment options in your trigger group, and adjust them accordingly to reduce unnecessary movement. A little adjustment goes a long way in refining your trigger pull and improving your shooting consistency.
While the AK Flex Trigger is a robust and high-performing component, it’s not immune to occasional issues. By understanding the most common problems and knowing how to troubleshoot them, you can keep your AK Flex Trigger in top working condition. Regular maintenance, including cleaning, lubrication, and inspection, can help prevent many of these issues. For more complex problems, seeking the help of a qualified gunsmith is always a good idea. With the right care, your AK Flex Trigger can continue to deliver excellent performance for years to come.
