Installation of the Rambo Flex Trigger: A Step-by-Step Guide

Upgrading your Glock with the Rambo Flex Trigger is a great way to enhance its performance, offering smoother pulls, faster resets, and a more responsive shooting experience. While the installation of  the Rambo Flex Trigger may sound daunting, with the right tools and a bit of patience, it can be done in a few simple steps. Here’s a straightforward guide to get you started.

Tools You Will Need:

• Small punch tool
• Glock punch set
• Flathead screwdriver
• Polymer tool (for trigger housing)
• Clean cloth or mat

Here is the step-by-step guide:

Step 1: Ensure Safety Before beginning, make sure the Glock is unloaded. Remove the magazine and visually check the chamber to confirm there is no ammunition. Safety should always be the first priority when working with firearms.

Step 2: Disassemble the Glock Start by removing the slide from the Glock frame. You’ll need to pull the slide back slightly, release the recoil spring and barrel, and then separate the slide from the frame. Once you remove the slide, focus on the internal trigger mechanism.

Step 3: Remove the Stock Trigger Before Using your punch tool, remove the pins that hold the stock trigger and trigger housing in place. There are typically two pins you’ll need to remove. Once the pins are out, carefully lift the stock trigger and housing assembly out of the frame.

Step 4: Install the Rambo Flex TriggerTake the Rambo Flex Trigger and carefully align it with the Glock’s internal trigger mechanism. Make sure the trigger bar and connector fit properly into their designated spots. The design of the Rambo Flex makes installation easy, but you must align it properly for optimal performance.

Step 5: Reassemble the Glock Once the Rambo Flex Trigger is securely in place, reinsert the trigger housing back into the frame and secure it with the pins. Slide the Glock’s slide back onto the frame and align it properly.

Step 6: Test the Trigger Once the installation is complete, perform a function check. Dry-fire the Glock in a safe environment to ensure the Rambo Flex Trigger is working as intended. Check for smooth trigger pulls and a quick reset.

By following these simple steps, you can easily install the Rambo Flex Trigger and enjoy enhanced performance, smoother trigger pulls, and faster resets on your Glock.